The GRABBER® Bugle Head Grabber Thread Black /Grey Phosphate Screws are coarse thread screws built for general purpose interior wood applications.

Also available in yellow zinc or clear zinc.

Attaches gypsum board and wood to wood. Extra sharp, single lead 23° GRABBER point, penetrates quickly.

Sharper threads make driving easier and provide better holding power.

---

Installation Guidelines

Use a standard screwgun with a depth-sensitive nose piece. Suggested screwgun specification for optimal performance – 4 amps minimum and 2500 RPM.

• The Bugle head is fully seated when the head is flush with the work surface.
• Overdriving may result in failure of the fastener or stripout of the work surface.
• For wood to wood connections, minimum penetration should be 7 diameters (e.g. 1-1/4” for #8 fastener)

All GRABBER® screw products are manufactured in facilities that are ISO 9002 and ISO 14001 certified and approved. The fasteners comply with ASTM C1002, as referenced in ICCES report ER-5280 are approved for use in structures governed by the International Building Code 2006, 2009, 2012, International Residential Building Code 2006, 2009, and 2012.