A high-strength screw anchor for use in cracked and uncracked concrete, as well as uncracked masonry. The Titen HD offers low installation torque and outstanding performance. The Titen HD screw anchor is designed for a wide variety of applications such as sill plates, ledgers, post bases, seating, and other holdown applications. The screw anchor is easy to remove when used in temporary applications such as bracing and formwork, or when a fixture needs to be relocated.

• Zinc plated/Carbon steel
• 5/8" x 5" 
• Drill bit diameter: 5/8"
• Wrench size: 15/16"
• Recommended Fixture Hole Size (in.): 3/4" to 13/16"
• Box Qty: 10
• Carton Qty: 40
• Tested in accordance with ACI 355.2, AC193 and AC106
• Qualified for static, wind, and seismic loading conditions
• Thread design undercuts to efficiently transfer the load to the base material
• Standard fractional sizes
• The specialized heat-treating process creates tip hardness for better cutting without compromising the ductility
• No special drill bit required — designed to install using standard-sized ANSI tolerance drill bits
• The hex-washer head requires no separate washer, unless required by code, and provides a clean installed appearance
• Removable — ideal for temporary anchoring (e.g., formwork, bracing) or applications where fixtures may need to be moved
• Use in dry interior environments only