The Evercoat Lite-Weight Lightweight Body Filler is built to fill and repair holes, dents, and scratches in bodywork and more.

Build

This filler has a smooth, creamy texture and can be molded and shaped into any formation according to your project.

This product is non-clogging when sanding helping to stop your sandpaper from loading up so you can keep working with less waste.

Provides a smooth, strong repair on a wide variety of materials.

Non-Clogging Formula!

Safety

Take precautionary measures against static discharge and keep this product away from heat, sparks, open flames, and hot surfaces.

Do not breathe dust/fume/gas/mist/vapors/spray.

Wash with soap and water thoroughly after handling.

Do not eat, drink or smoke when using this product.

Capacities

How to Use

• Wear chemically resistant safety glasses with side shields, protective gloves, and respirator.
• Clean surfaces and remove all dirt, oil, grease, and wax.
• Use 40-80 grit sandpaper to remove paint and smooth surface to be filled.
• Surfaces must be completely dry.
• Place the desired amount of filler on a clean mixing board, add a ribbon of cream hardener and then mix. (See attachment for complete instructions.)
• Setting time is 5-6 minutes @ 27°C
• Spread thin layer on surface and mold into the desired shape, add more layers as necessary. Sandable in 10-20 minutes.

Clean-Up and Storage

Wash hands with soap and water and wash any contaminated clothing before reuse.

Keep container tightly closed.

Store in a well-ventilated place.

Keep cool.

Store locked up.

The following is included with this lightweight body filler:

• (1) 78g Blue Cream Hardener Squeeze Tube