Impact Taps UNC - Hex Drive Shank / High Speed Steel *Fractional
SpeedTaps™ / Coarse Thread - Built for impact tapping into hard to thread materials - Hex drive shank to match bolt sizing and utilize all the advantages of common sockets and wrenches - 60° Tapered Flute
Impact Taps UNC - Hex Drive Shank / High Speed Steel *Fractional
SpeedTaps™ / Coarse Thread - Built for impact tapping into hard to thread materials - Hex drive shank to match bolt sizing and utilize all the advantages of common sockets and wrenches - 60° Tapered Flute 
Product #: SPDTPS5/16
Product is missing measurements and cannot be shipped. Please call 403-287-5340 so we can fix this issue and enable shipping.
Options: DIA.: 5/16"
Info: 18 UNC | 1/2 Socket | G Drill
$24.89 /EA
Login for contractor price
Regular: $24.89 /
SPDTPS1/4 1/4" 20 UNC | 7/16 Socket | #6 Drill , InStock
$18.12 /EA
SPDTPS5/16 5/16" 18 UNC | 1/2 Socket | G Drill , InStock
$24.89 /EA
SPDTPS3/8 3/8" 16 UNC | 9/16 Socket | O Drill , InStock
$27.17 /EA
SPDTPS1/2 1/2" 13 UNC | 3/4 Socket | 7/16 Drill , SoldOut
$38.33 /EA
DIA.
Info
PROD #
Price
1/4"
20 UNC | 7/16 Socket | #6 Drill
SPDTPS1/4
$18.12 /EA
5/16"
18 UNC | 1/2 Socket | G Drill
SPDTPS5/16
$24.89 /EA
3/8"
16 UNC | 9/16 Socket | O Drill
SPDTPS3/8
$27.17 /EA
1/2"
13 UNC | 3/4 Socket | 7/16 Drill
SPDTPS1/2$38.33 /EA
Available Online: 5
Pre Order Item
Estimated Availability Date:
Estimated Availability Date:
Availability in Store:
Call for Availability : 403-287-5340
QTY: 
BUY DIRECT
SPDTPS1/4 1/4" 20 UNC | 7/16 Socket | #6 Drill
$18.12 /EA
SPDTPS5/16 5/16" 18 UNC | 1/2 Socket | G Drill
$24.89 /EA
SPDTPS3/8 3/8" 16 UNC | 9/16 Socket | O Drill
$27.17 /EA
SPDTPS1/2 1/2" 13 UNC | 3/4 Socket | 7/16 Drill
$38.33 /EA
Call for Availability : 403-287-5340
DIA.
Info
PROD #
Price
1/4"
20 UNC | 7/16 Socket | #6 Drill
SPDTPS1/4
$18.12 /EA
5/16"
18 UNC | 1/2 Socket | G Drill
SPDTPS5/16
$24.89 /EA
3/8"
16 UNC | 9/16 Socket | O Drill
SPDTPS3/8
$27.17 /EA
1/2"
13 UNC | 3/4 Socket | 7/16 Drill
SPDTPS1/2$38.33 /EA
Product Description
SpeedTaps™ taper taps are built with 60° Tapered Flutes and high speed steel to create female threads in hard to thread materials.
Build
These taps are built with a drive end that match bolt sizing and utilize all the advantages of common sockets and wrenches.
Tests on mild steel indicate tapping 100 holes or more while maintaining the same high quality thread.
Tap construction allows these taps to work in tight spaces that would normally be too close for working with traditional tap wrenches.
Tap threads up to 14x faster! SpeedTaps™ are highly durable and built for use with an impact wrench for optimal speed!
Capacities
| SpeedTap | Max. Material Thickness | Socket Size | Drill Size |
| 1/4" | 3/16" | 7/16" | #6 |
| 5/16" | 1/4" | 1/2" | G |
| 3/8" | 5/16" | 9/16" | 0 |
| 1/2" | 3/8" | 3/4" | 7/16" |
| PLEASE NOTE: Use as a hand tap when using SpeedTaps™ in thicker material | |||
How to Use
- Use with IMPACT DRIVERS - RATCHET WRENCHES - COMBO WRENCHES
- Tapping Oil is recommended to increase tool life
- Based on independent test results, 200 consecutive holes can then be threaded
SpeedTaps™ have been engineered with changes to the heat treatment compared to most hand taps allowing them to take the impact from an impact wrench increasing productivity 14 to 1 over tapping by hand.
Tap Features
- 6 Thread Taper for Faster Starts
- 60° Tapered Point for Easy Alignment
- Nitrate Coating for Extended Tap Life
- Full-Size Shaft Maximizes Strength as well as ease of Reversal of the Tap
- Head size matches bolt size for single tool operation of tapping bolting
- Patent pending flared head construction reduces tangential force maximizing torque transfer
- Taper Tap: Cutting tools built with a pronounced taper towards the cutting edges. This helps the tap to ease into cutting female threads gradually.
- Tap: A tap is built to cut a female thread on the inside surface of a hole.
Product Specifications
| Vendor Part #: | TPS1/4 |
| Material: | High Speed Steel (HSS) |
| Point: | [60 degrees] |
| Shank Shape: | Hexigonal |
| Thread: | UNC |
| Flute Shape: | Tapered |
- Product | Specials & Promotions Current Specials & Promotions from Major Power Tool Brands, Fasteners, Hand Tools & More!
https://www.calfast.com/specials-promotions - Article | Unified Threads The Unified Thread System (or Unified Thread Standard - UTS) defines a standard thread form and series for fasteners
https://www.calfast.com/cs_wiki/wiki/31-Unified-Threads - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.calfast.com/cs_wiki/wiki/47-ingress-prot... - Article | Imperial to Metric Imperial to Metric Comparison and Conversion Charts
https://www.calfast.com/cs_wiki/wiki/33-Imperial-to-...
