Cable/Conduit/Strut Fittings
U-shaped clip for clamping the back of strut channel to a beam - Hex bolt included - Requires installation in pairs
$9999999.00 /100PC
Please Call for Special Orders
U-shaped clip for clamping the back of strut channel to a beam - Hex bolt included - Requires installation in pairs
$9999999.00 /100PC
Please Call for Special Orders
Pivots 360° - Requires Only a Hammer for Install - For supporting conduit/pipe or cable from beam flanges
$9999999.00 /100PC
Please Call for Special Orders
Pivots 360° - Requires Only a Hammer for Install - For supporting conduit/pipe or cable from beam flanges
$9999999.00 /100PC
Please Call for Special Orders
CD - Retained bolt and built-in nut means there are less parts to handle or drop - Combo Head bolt ready to work with any tool handy - Slotted, Hex, #3 Phillips & #2 Robertson
$9999999.00 /100PC
Please Call for Special Orders
CD - Retained bolt and built-in nut means there are less parts to handle or drop - Combo Head bolt ready to work with any tool handy - Slotted, Hex, #3 Phillips & #2 Robertson
$9999999.00 /100PC
Please Call for Special Orders
CD - Retained bolt and built-in nut means there are less parts to handle or drop - Combo Head bolt ready to work with any tool handy - Slotted, Hex, #3 Phillips & #2 Robertson
$9999999.00 /100PC
Please Call for Special Orders
CD - Retained bolt and built-in nut means there are less parts to handle or drop - Combo Head bolt ready to work with any tool handy - Slotted, Hex, #3 Phillips & #2 Robertson
$9999999.00 /100PC
Please Call for Special Orders
SCH1 - One-piece conduit clamp - No screws or bolts to drop - Requires only a screwdriver or nutdriver for installation - Fits into open side of strut channel
$9999999.00 /100PC
Please Call for Special Orders
SCH1 - One-piece conduit clamp - No screws or bolts to drop - Requires only a screwdriver or nutdriver for installation - Fits into open side of strut channel
$9999999.00 /100PC
Please Call for Special Orders
SK - One piece break apart strut clamp for EMT and Rigid conduit - Includes thread impression and captured screw
$9999999.00 /100PC
Please Call for Special Orders
SK - One piece break apart strut clamp for EMT and Rigid conduit - Includes thread impression and captured screw
$9999999.00 /100PC
Please Call for Special Orders
BC-M -Easy installation to beam flanges - Eliminates offset bending conduit - Conduit clip rotates 360 degrees
$9999999.00 /100PC
Please Call for Special Orders
BC-M -Easy installation to beam flanges - Eliminates offset bending conduit - Conduit clip rotates 360 degrees
$9999999.00 /100PC
Please Call for Special Orders
SCH2 - One-piece cable / conduit clamp with protective boot - No screws or bolts to drop - Requires only a screwdriver or nutdriver for installation - Fits into open side of strut channel
$9999999.00 /100PC
Please Call for Special Orders
SCH2 - One-piece cable / conduit clamp with protective boot - No screws or bolts to drop - Requires only a screwdriver or nutdriver for installation - Fits into open side of strut channel
$9999999.00 /100PC
Please Call for Special Orders
SC - Clip snaps on flange and cable snaps into clip
$9999999.00 /100PC
Discontinued
SC - Clip snaps on flange and cable snaps into clip
$9999999.00 /100PC
Discontinued
K - Supports conduit to rod, wire or flange - Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable
$9999999.00 /100PC
No Longer Stocked
K - Supports conduit to rod, wire or flange - Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable
$9999999.00 /100PC
No Longer Stocked
K - Supports conduit to rod, wire or flange - Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable
$9999999.00 /100PC
Please Call for Special Orders
K - Supports conduit to rod, wire or flange - Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable
$9999999.00 /100PC
Please Call for Special Orders
CADDY® ARMOUR - Hammer-On Flange Clip, Side Mount w/ Flange Thickness (FT): 3/32" – 9/64", Hole Size (HS): 1/4"
$9999999.00 /100PC
Please Call for Special Orders
CADDY® ARMOUR - Hammer-On Flange Clip, Side Mount w/ Flange Thickness (FT): 3/32" – 9/64", Hole Size (HS): 1/4"
$9999999.00 /100PC
Please Call for Special Orders
CD - Retained bolt and built-in nut means there are less parts to handle or drop - Combo Head bolt ready to work with any tool handy - Slotted, Hex, #3 Phillips & #2 Robertson
$9999999.00 /100PC
Please Call for Special Orders
CD - Retained bolt and built-in nut means there are less parts to handle or drop - Combo Head bolt ready to work with any tool handy - Slotted, Hex, #3 Phillips & #2 Robertson
$9999999.00 /100PC
Please Call for Special Orders
K - Supports conduit to rod, wire or flange - Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable
$9999999.00 /100PC
Please Call for Special Orders
K - Supports conduit to rod, wire or flange - Can also be used for flexible metallic tubing, armored cable, portable cables, control tubes and communications cable
$9999999.00 /100PC
Please Call for Special Orders
SC - Clip snaps on flange and cable snaps into clip
$9999999.00 /100PC
Please Call for Special Orders
SC - Clip snaps on flange and cable snaps into clip
$9999999.00 /100PC
Please Call for Special Orders
