Estimated Availability Date:
Call for Availability : 403-287-5340
The 3M 10 Bond Contact Cement is built to provide an instant bond for both porous and non-porous materials to other materials or to themselves.
Build
This adhesive air dries and provides an immediate bond to surfaces when pressure is applied to coated surfaces.
Get an instant and permanent bond with this contact cement.
Brush on to both surfaces of the materials you want to bond for best results.
No clamping required!
Safety
Do not breathe in vapors or get in eyes, on the skin or on clothing.
Wear indirect vented goggles, polymer laminate gloves, and a respirator.
Capacities
Decorative Laminates | Aluminum | Steel | Plywood |
Panels | Wood and Wood Veneer | Leather | Masonry |
Rubber | Canvas | Metal | Glass |
Tile | Plastics | Gems | Fabric |
How to Use
- Surfaces must be clean, dust free, and dry
- Stir well before applying
- Apply a uniform and generous coat to both surfaces to be bonded together
- Porous surfaces may need 2 coats
- Dull spots after coat has dried require another coat
- Pay extra attention to edges for a good bond
- Allow cement to fully dry on both surfaces
- Apply maximum pressure when connecting glued surfaces together
Clean-Up and Storage
Use a solvent based cleaner or 3M Contact Adhesive Solvent to clean up any excess product, brushes, and over-spill.
Dispose of contents and container according to HAZMAT procedures.
Certifications, Standards, and Regulations
- In Compliance with China's "Measures on Environmental Management of New Chemical Substances"
- Korean Toxic Chemical Control Law
- Australia NICNAS
- Philippines RA 6969
- CEPA
- TSCA
- Contact Cement: An adhesive that is coated on two surfaces that are going to be bonded together and allowed to dry. Then, when the two surfaces are firmly applied to each other, they create an instant and permanent bond.
- Glue: A substance that is used for bonding materials together that is typically made from natural plant and animal sources.
- Adhesive: A substance that is used for bonding materials together that is typically made from synthetic materials.
Vendor Part #: | 10BOND1GAL |
VOC: | Less Than 587 g/l |
Cure Type: | Air |
Dry Color: | Yellow |
Container Type: | Cannister |
Storage: | Cool, Well-Ventilated Space |
Dangerous Goods: | Yes |
Flash Point : | -25.6°C |
- √Providing an Instant, Permanent Bond
- Product | Specials & Promotions Current Specials & Promotions from Major Power Tool Brands, Fasteners, Hand Tools & More!
https://www.calfast.com/specials-promotions - Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.calfast.com/cs_wiki/wiki/47-ingress-prot...