Estimated Availability Date:
Call for price & availability : 403-287-5340
The Fluke 1AC II Non-Contact Voltage Tester is built to be easy to use! Just touch the tip to a terminal strip, outlet, or supply cord. When the tip glows red and the unit beeps, you know there's voltage present.
Electricians, maintenance, service, safety personnel, and homeowners can quickly test for energized circuits in the workplace or at home and even detect miswires of an electrical outlet.
Build
The Fluke 1AC II is built to senses the steady state electrostatic field produced by AC voltage through insulation without requiring contact to the bare conductor. A red glow at the tip and a beeping noise (if not switched OFF) indicates the presence of voltage.
The tip glows red and a beeper sounds when voltage is detected
- A loud, easy to hear beeper will sound and the tip will glow red when voltage is detected
- Optionally, the beeper can be disabled for use in quiet environments
Continuous self-test so you always know it’s working
- When the tip blinks red you know it’s working properly
- Provides a continual visual indication that the 1AC II is on
90 V to 1000 V AC or 200 V to 1000 V AC voltage detection range for wide application use
- Wide voltage detection range allows for use in a broad range of applications
- Also available in a low voltage model from 20 V to 90 V AC for controls circuits
Audible/Silent mode for added convenience in quiet environments!
On/Off button
Certifications & Safety
Rated to CAT IV 1000 V for added protection | |
CE and CSA approved | |
Safety | IEC 61010-1: Pollution Degree 2, IEC 61010-2-030: CAT IV 1000 V |
EMC | IEC 61326-1: Portable |
Clean with a Damp Cloth
Vendor Part #: | 1AC-A1-II |
Battery Life: | Typical battery life of greater than 1 year |
Battery Requirements: | [2 AAA] Alkaline (Batteries Included) |
Operating Temperature Range: | -10°C to 50°C |
Tip Style: | Flat-Tip |
IP Rating: | IP40 |
Nominal Voltage Sensing Range: | 90 V AC to 1000 V AC |
Light Source: | One |
Light Color: | RED |
Light Type: | High Intensity LED |
Operating Humidity Range @ 0°C to 30°C: | 0% to 95% |
Operating Humidity Range @ 30°C to 40°C: | 0% to 75% |
Operating Humidity Range @ 40°C to 55°C: | 0% to 45% |
Operating Altitude: | [3000 m] |
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.calfast.com/cs_wiki/wiki/47-ingress-prot...