Tile Saw - 10" - 15 A / VX10.2XLPRO
PEAVX10.2XLPRO PEAVX102XLPROSTEstimated Availability Date:
Please Call for Special Orders : 403-287-5340
PEAVX10.2XLPRO PEAVX102XLPROST
Pearl Abrasives expanded from a small family enterprise into an international corporation selling coated and bonded abrasives, diamond superabrasives, and equipment throughout North, Central, and South America since 1968.
No customer reviews for the moment.
The Pearl 10" Tile Saw is built to cleanly cut through tile for a professional finish every time.
The heavy-duty, 2 HP motor cuts with ease!
Build
This 10" saw with a 5/8" arbor has a 24" rip and 18" diagonal cutting capacity.
The unit is constructed out of stainless steel for ultimate corrosion resistance.
The water tray and guide rails are also made of stainless steel offering a considerably longer lifespan to this tile saw than those made of regular steel or plastic components.
It comes with a heavy-duty on/off switch, 10 sealed metal roller bearings, 45/90 rip guide, water pump, and miter block allowing you the ability to use this saw with confidence on any job site.
Power
Built to handle tough jobs, this saw delivers exceptional speeds at 3450 RPM and can run on either a 115V or 230V power supply.
In the Box
The following is included with this 10" Tile Saw (PEAVX10.2XLPRO):
- (1) 10" Professional Diamond Blade
- (1) 45/90 Rip Guide
- (1) Water Pump
- (1) Miter Block
- (1) Owner's Manual
- (1) Warranty Card
Stand Sold Separately.
The following is included with this 10" Tile Saw w/ Stand (PEAVX102XLPROST):
- (1) 10" Professional Diamond Blade
- (1) 45/90 Rip Guide
- (1) Water Pump
- (1) Miter Block
- (1) Owner's Manual
- (1) Warranty Card
- (1) Stand
| Vendor Part #: | VX10.2XLPRO |
| Approx. Weight: | 84 lbs |
| Arbor: | [ 5/8 inch] |
| Blade Diameter: | 8 inches ~ 10 inches |
| Cutting Capacity: | 3-1/4 inches |
| Cutting Capacity - Diagonal: | 18 inches by 18 inches |
| Height: | 19-1/4 inches |
| Hertz: | 60 Hz |
| Horsepower: | [2 hp] |
| Length: | 24 inches |
| Ripping Capacity: | 24 inches by 24 inches |
| RPM: | 3,450 RPM |
| Voltage: | 115 V |
| Voltage/Phase: | [115 Volts]/[1 PH] |
| Width: | 22-1/2 inches |
- √for Cutting Tile
- Article | IP Ratings Learn more about what an IP rating is and how this rating system is used.
https://www.calfast.com/cs_wiki/wiki/47-ingress-prot...
